Front Panel

Photo 1

The photograph above shows the completed front panel assembly. The headphone jack is mounted on the RF board and will be inserted through the square hole visible on the right side of photograph 2.

Photo 2

The PIC16C77MCU microcontroller chip is the large IC visible on the rear of the front panel circuit board. The main tuning ten turn potentiometer is the gray control on the left. The front panel assembly plugs into the main RF board using the 20 pin connector labeled J1.

Building time for the front panel assembly was about 4 hours.

Construction hint:

 Forward to RF Board

Return to K1 Main Page